MultifuelACR / Multifuel
ACR Woodpecker WP5



Stone fireplace. Manufacturer room setting: WP5 framed by a pale stone fireplace. Surround, hearth and room furnishings are illustrative. ACR imagery (opens in a new tab) ↗
Brick backdrop. Manufacturer setting showing the WP5 body, door and controls against exposed brick. ACR imagery (opens in a new tab) ↗
Manufacturer drawing. ACR manual, page 4: WP5 model excerpt. Manufacturer body dimensions; confirm the current supplied model drawing before planning the opening. ACR imagery (opens in a new tab) ↗
This model will be included in your enquiry. No completed plan needed.
A generous flame view in a relatively narrow body. Woodpecker WP5 combines a 420mm-wide form with a large glass door, making it worth shortlisting when you want the fire to feel prominent without a broad stove body.
- 420mm listed body width
- Wood or permitted smokeless fuel
- 5kW nominal output
Catalogue imagery, not a completed Stove Group installation. Confirm the pictured finish and configuration with your quotation.
Listed appliance dimensions
- Width
- 420mm
- Height
- 550mm
- Depth
- 314mm
Body dimensions and stated variants. Allow for the installation requirements too. See full specifications ↓
A closer look
The details
that matter.
Our reading of the design and manufacturer information, to help you build a useful shortlist. Your home assessment confirms the fit.
Keep the flame in focus
The large door gives the front a simple, open feel. Its narrower body is useful to compare with WP5 Plus when deciding how much space you want to see around the stove.
Choose your fuel routine
ACR identifies WP5 as suitable for wood or smokeless fuel. Tell the installer what you intend to burn so the permitted fuels, operating instructions and local restrictions can be checked together.
Compare with the Plus
WP5 Plus adds 70mm of listed width while retaining the same listed height, depth and nominal output. That makes the comparison particularly useful for the appearance of the opening.
- Log length
- 40cm
Make your enquiry useful
- Does the proposed fuel match the exact WP5 manual?
- How much space will remain around the stove within the opening?
- Which supply route and warranty terms are included in the quotation?
Dimensions & performance
Get to know
your fire.
Use the current manufacturer instructions for the exact model and variant when planning the installation.
- Height
- 550mm
- Width
- 420mm
- Depth
- 314mm
- Output range
- 2.5 to 7kW
- Efficiency
- 75.3% gross, 82.5% nett
- Weight
- 70kg
- Flue diameter
- 125mm
- Smoke exempt
- Yes, DEFRA approved for wood burning in smoke control areas
- Log length
- 40cm
- Energy rating
- A+
- Nominal output
- 5kW
Manufacturer information
Before you choose
Good questions.
A better fit.
Keep the practical details alongside the look you have in mind.
Follow the buying guideWill this appliance suit my home?
The room, heat requirement, chimney or proposed flue, ventilation, hearth and required clearances need assessing together. The listed output alone cannot establish suitability. Prepare the information for an assessment.
Can I enquire without using the planner?
Yes. Start an enquiry with this model already selected. Tell us what you have in mind and whether you need an appliance, help with installation or advice on the choice.
Can I keep exploring before enquiring?
Yes. Compare up to three appliances, or take this one into the planner to explore the setting. You can download a plan and share your choices before sending an enquiry.
Who carries out the installation?
The Stove Group is developing a partner installer network. The provider, availability in your area and assessment arrangements need confirming before work is booked. Read how the process works.
Demo project inspiration
Picture the possibilities.
Fictional project briefs using this appliance, with illustrative imagery.
A little inspiration. A place to start.

