Skip to content
Menu
THE STOVEGROUP
Build your own Request a quote
Home/Journal/Living with your stove

Living with your stove / 4 minute read

Your stove care calendar: sweeping, servicing and CO safety

A practical ownership timetable, the difference between a sweep and a service, and clear action if carbon monoxide is suspected.

At a glance

  • Sweeping and appliance servicing are different tasks.
  • Agree a maintenance schedule for the appliance, fuel and level of use.
  • A carbon monoxide alarm supports safe use; it does not replace maintenance.

Start the calendar at handover

Before the installer leaves, get a demonstration of the controls and the first-use procedure. Put the manual, commissioning information, relevant approval documents and warranty details in one place. Record the model, serial number and contacts for sweeping and servicing.

Add the CO alarm’s model, test instructions and replacement date. Everyone who uses the room should know its warning signal and the action to take. A maintenance record is useful only if the people living with the appliance can find it.

Further reading: HETAS — Appliance servicing and maintenance · HETAS — Carbon monoxide safety

An ownership timetable you can adapt

This is a planning framework, not a replacement for the appliance or alarm manual. Use the manufacturer’s intervals and the professional advice for your installation; put actual dates in your own calendar.

Your stove care calendar
WhenActionRecord / responsibility
At handoverLearn controls, first use, routine care and alarm operation.Owner keeps documents and professional contact details.
At the alarm’s stated test intervalTest and maintain it as the alarm manufacturer directs.Owner records its replacement date and follows fault instructions.
During useFollow the manual for fuel, cleaning and ash handling; act on unusual behaviour.Stop and seek advice about damage, fumes or faults.
Sweeping appointmentsHETAS recommends at least twice yearly for wood, at least annually for smokeless fuel; use may require more.Agree the schedule with the sweep and retain the record.
Servicing interval in the manualBook appliance servicing and required component checks.Confirm the scope and use a person competent for the work.
Before restarting after a long idle periodDiscuss checks needed before bringing the appliance back into use.Arrange appropriate inspection rather than assuming it is unchanged.

Further reading: HETAS — Why and how often to have a chimney swept · HETAS — Appliance servicing and maintenance · HETAS — Carbon monoxide safety

A sweep and a service are different jobs

Sweeping deals with deposits and the route for combustion gases. Appliance servicing addresses the stove and its components. A combined visit may cover both, but the appointment name does not tell you the scope. Confirm what is included and who is doing it.

HETAS’s sweeping intervals are a starting point; heavy use may need more frequent attention. Keep records of findings and follow-up recommendations. If a control, seal, glass panel or internal component is damaged or behaves differently, seek competent advice before continued use. Choose replacement parts by exact model and specification, not visual similarity.

Further reading: HETAS — Why and how often to have a chimney swept · HETAS — Appliance servicing and maintenance

Treat a CO warning as urgent

Carbon monoxide has no colour or smell. An audible CO alarm provides important protection but does not replace correct installation, maintenance or ventilation. Do not disable an alarm because it is inconvenient or keep using the stove while trying to explain away an activation.

Further reading: NHS — Carbon monoxide poisoning and urgent action · HETAS — Carbon monoxide safety

Keep emergency action separate from routine care

A photo, a service reminder or an email to an installer can wait when someone may be exposed to fumes. Once the immediate situation is dealt with, the appliance needs professional assessment before reuse. An alarm that has stopped sounding does not establish that the cause has been fixed.

For ordinary maintenance, a simple log is enough: date, person attending, work completed and next action. It helps the next professional understand the installation and prevents a recommendation disappearing into an old message.

Further reading: HETAS — Carbon monoxide safety · HETAS — Appliance servicing and maintenance

Sources & useful checks

Source review: 16 October 2026. Sources are listed with their own access dates. Check the current guidance for your address and appliance.

Sources, authorship & review

Your next step

Your new fire.
Let’s make a start.

Tell us about your home and the fireplace you have in mind. You can choose an appliance now or leave room for advice.

Request a quote Or build your own plan