Wood burningFire FX / Wood burning
Fire FX Eton 5




Stone fireplace. FireFX Eton 5 shown within a stone fireplace in a manufacturer room setting. Fire FX imagery (opens in a new tab) ↗
Front view. Manufacturer front view of the FireFX Eton 5, showing the stepped detailing around its door. Fire FX imagery (opens in a new tab) ↗
Blue interior. FireFX Eton 5 in a manufacturer room setting with blue walls and a freestanding hearth. Fire FX imagery (opens in a new tab) ↗
Green interior. FireFX Eton 5 within a traditional fireplace in a green manufacturer room setting. Fire FX imagery (opens in a new tab) ↗
This model will be included in your enquiry. No completed plan needed.
A wood burner with a more traditional face. Eton 5 frames its large window with a detailed cast iron door, bringing a defined focal point to a stone surround, brick chamber or simple hearth.
- Detailed cast iron door
- 5kW nominal output
- Large front viewing window
Catalogue imagery, not a completed Stove Group installation. Confirm the pictured finish and configuration with your quotation.
Listed appliance dimensions
- Width
- 469mm
- Height
- 515mm
- Depth
- 382mm
Body dimensions and stated variants. Allow for the installation requirements too. See full specifications ↓
A closer look
The details
that matter.
Our reading of the design and manufacturer information, to help you build a useful shortlist. Your home assessment confirms the fit.
A little more character
The bevelled door and cornice give Eton a different presence from the plainer Echo. It is worth comparing both against a photo of your existing surround, especially if that surround already has strong decorative details.
Style without a bigger heat rating
The listed nominal output matches Echo at 5kW. The main choice between them is the form and detailing, rather than an assumption that the more traditional model will produce more heat.
Plan the whole opening
Top and rear flue connections are listed. The right route depends on the fireplace and flue assessment; it also affects the amount of pipe visible above the stove.
- Construction
- Cast iron and steel
- Maximum log length
- 330mm
Make your enquiry useful
- Can the supplier confirm the current Eton drawing and collar height?
- Will the door have comfortable opening and loading space?
- How would the finished chamber and hearth frame the detailed front?
Dimensions & performance
Get to know
your fire.
Use the current manufacturer instructions for the exact model and variant when planning the installation.
Manufacturer listing dimensions are 469mm wide, 515mm high and 382mm deep. The current brochure shows 552mm height including the top flue collar. Some measurements differ in the linked installation manual; confirm the exact supplied model and current drawing before planning the opening or ordering.
- Width
- 469mm
- Height
- 515mm
- Depth
- 382mm
- Nominal output
- 5kW
- Output range
- 3.5 to 7.5kW
- Efficiency
- 82.7%
- Energy rating
- A+
- Flue diameter
- 125mm (5 inch)
- Flue location
- Top or rear
- Direct air
- Yes
- DEFRA exempt
- Yes
- Ecodesign
- Yes
- Airwash
- Yes
- Cleanburn
- Yes
- Construction
- Cast iron and steel
- Weight
- 81kg
- Finish
- Black
- Maximum log length
- 330mm
Manufacturer information
Before you choose
Good questions.
A better fit.
Keep the practical details alongside the look you have in mind.
Follow the buying guideWill this appliance suit my home?
The room, heat requirement, chimney or proposed flue, ventilation, hearth and required clearances need assessing together. The listed output alone cannot establish suitability. Prepare the information for an assessment.
Can I enquire without using the planner?
Yes. Start an enquiry with this model already selected. Tell us what you have in mind and whether you need an appliance, help with installation or advice on the choice.
Can I keep exploring before enquiring?
Yes. Compare up to three appliances, or take this one into the planner to explore the setting. You can download a plan and share your choices before sending an enquiry.
Who carries out the installation?
The Stove Group is developing a partner installer network. The provider, availability in your area and assessment arrangements need confirming before work is booked. Read how the process works.
Demo project inspiration
Picture the possibilities.
Fictional project briefs using this appliance, with illustrative imagery.
A little inspiration. A place to start.

