Wood burningCarl Finnell / Wood burning
CF1

Catalogue setting. CF1 in the existing Carl Finnell catalogue setting. Image authorship and model documentation need confirming before launch. Carl Finnell catalogue (opens in a new tab) ↗
This model will be included in your enquiry. No completed plan needed.
A broad, simple front that puts the wood fire at the centre of a fireplace. CF1 is worth considering when you prefer a wide viewing window within a defined chamber or surround.
- Wide rectangular window
- Listed 5kW output
- Simple fireplace silhouette
Catalogue imagery, not a completed Stove Group installation. Confirm the pictured finish and configuration with your quotation.
Listed appliance dimensions
- Width
- 520mm
- Height
- 560mm
- Depth
- 359mm
Body dimensions and stated variants. Allow for the installation requirements too. See full specifications ↓
A closer look
The details
that matter.
Editorial guidance from the listed specifications, to help you compare. Your home assessment confirms the fit.
Balance the opening
The straight lines work with brick, stone and plain plaster finishes. Send a photograph that includes the full surround and hearth so the stove can be considered as part of the room.
Compare within the CF range
CF2 has a narrower listed body. CF3 shares the CF1 catalogue body measurements but has a higher listed output. These are useful distinctions for a shortlist, with the room assessment deciding the heating requirement.
Specify the whole fireplace
Ask for the stove, hearth, chamber, flue work and finishing to be identified separately. That makes the proposal easier to compare with another model or a different surround.
Make your enquiry useful
- What is the manufacturer and exact model behind the CF1 name?
- Can the supplier confirm the body width against a current drawing?
- Which chamber, hearth and flue works are included?
Dimensions & performance
Get to know
your fire.
Use the current manufacturer instructions for the exact model and variant when planning the installation.
The client catalogue lists a 520mm body width for CF1, while its dimension illustration shows 560mm. That illustration has been excluded from this gallery. Confirm the manufacturer identity and current model drawing before relying on these dimensions.
- Fuel type
- Wood
- Heat output
- 5.0kW (range 4.3 to 6.4kW)
- Efficiency
- 83.9%
- Weight
- 87kg
- Height
- 560mm
- Width
- 520mm
- Depth
- 359mm
- Outlet diameter
- 125mm
- Air systems
- Primary and secondary (airwash), plus tertiary air
- Minimum chamber width
- 620mm
- Recommended chamber width
- 850mm
- Minimum chimney breast width
- 1250mm
- Smoke exempt
- Yes, DEFRA exempt for smoke control areas
- Standards
- 2022 Ecodesign compliant, HETAS approved
Product references
Before you choose
Good questions.
A better fit.
Keep the practical details alongside the look you have in mind.
Follow the buying guideWill this appliance suit my home?
The room, heat requirement, chimney or proposed flue, ventilation, hearth and required clearances need assessing together. The listed output alone cannot establish suitability. Prepare the information for an assessment.
Can I enquire without using the planner?
Yes. Start an enquiry with this model already selected. Tell us what you have in mind and whether you need an appliance, help with installation or advice on the choice.
Can I keep exploring before enquiring?
Yes. Compare up to three appliances, or take this one into the planner to explore the setting. You can download a plan and share your choices before sending an enquiry.
Who carries out the installation?
The Stove Group is developing a partner installer network. The provider, availability in your area and assessment arrangements need confirming before work is booked. Read how the process works.
A little inspiration. A place to start.

