Wood burningACR / Wood burning
ACR Neo XP


Pedestal in the room. Manufacturer room setting showing the Neo XP pedestal base. The cupboard-base Neo XC is a separate model. ACR imagery (opens in a new tab) ↗
Manufacturer drawing. ACR manual, page 5: Neo XP drawing excerpt. Manual and product-page dimensions differ slightly. Confirm the supplied version and current drawing before planning the hearth. ACR imagery (opens in a new tab) ↗
This model will be included in your enquiry. No completed plan needed.
A broad glass-fronted fire lifted on a narrow pedestal. Neo XP creates a lighter-looking base than the cupboard-front Neo XC, making it an appealing focal point for an open wall.
- Pedestal base
- Wide black-glass door
- 5kW nominal output
Catalogue imagery, not a completed Stove Group installation. Confirm the pictured finish and configuration with your quotation.
Listed appliance dimensions
- Width
- 490mm
- Height
- 1055mm
- Depth
- 390mm
Body dimensions and stated variants. Allow for the installation requirements too. See full specifications ↓
A closer look
The details
that matter.
Our reading of the design and manufacturer information, to help you build a useful shortlist. Your home assessment confirms the fit.
Look at it from across the room
The pedestal is central to the design. Consider views from the doorway and seating as well as the front, then choose a hearth shape that gives the stove room to stand on its own.
Compare the base you want
Neo XC uses a cupboard base; Neo XP is the pedestal version. Keep those names distinct when saving photographs or asking for a quotation.
Plan the visible flue
ACR lists top and rear flue connections. The assessment determines the feasible route, which also affects how much pipe is visible above the stove.
- Construction
- Cast iron and steel
- Log length
- 40cm
Make your enquiry useful
- Does the pedestal suit the main viewing angles?
- Which current Neo XP drawing applies?
- Would a top or rear flue connection work better here?
Dimensions & performance
Get to know
your fire.
Use the current manufacturer instructions for the exact model and variant when planning the installation.
The manufacturer page lists 1055mm height and 390mm depth. The Neo XP manual drawing shows 1056mm height including the top flue collar, 1031mm to the top plate and 389mm body depth. Confirm the current supplied drawing and measurement convention before planning the hearth or flue.
- Height
- 1055mm
- Width
- 490mm
- Depth
- 390mm
- Output range
- 5kW nominal (3.5kW min / 8.5kW max)
- Efficiency
- 72.3% gross, 79.4% nett
- Weight
- 105kg
- Flue diameter
- 125mm, top or rear
- Smoke exempt
- Yes, DEFRA approved for wood burning in smoke control areas
- Log length
- 40cm
- Construction
- Cast iron and steel
- Energy rating
- A
Manufacturer information
Before you choose
Good questions.
A better fit.
Keep the practical details alongside the look you have in mind.
Follow the buying guideWill this appliance suit my home?
The room, heat requirement, chimney or proposed flue, ventilation, hearth and required clearances need assessing together. The listed output alone cannot establish suitability. Prepare the information for an assessment.
Can I enquire without using the planner?
Yes. Start an enquiry with this model already selected. Tell us what you have in mind and whether you need an appliance, help with installation or advice on the choice.
Can I keep exploring before enquiring?
Yes. Compare up to three appliances, or take this one into the planner to explore the setting. You can download a plan and share your choices before sending an enquiry.
Who carries out the installation?
The Stove Group is developing a partner installer network. The provider, availability in your area and assessment arrangements need confirming before work is booked. Read how the process works.
Demo project inspiration
Picture the possibilities.
Fictional project briefs using this appliance, with illustrative imagery.
A little inspiration. A place to start.

